GEMMASTA Machines for Sawing

Specially designed freehand cutting machine. Machine takes 150mm or smaller blades. Larger than standard flanges can be supplied for thinner diamond blades. Supplied with 1/3 hp motor.

Specially designed freehand cutting machine. Machine takes 150mm or smaller blades. Larger than standard flanges can be supplied for thinner diamond blades. Supplied with 1/3 hp motor and blade stand.

A precision unit for slabbing and trimming with sliding table. It will cut rock 140 x 75mm with no zig-zag and no cutting ride-up on blade. Supplied with perspex hood. Mounted on board with 1/2 hp motor.

A precision unit for slabbing and trimming with sliding table. It will cut rock 140 x 75mm with no zig-zag and no cutting ride-up on blade. Supplied with perspex hood. Mounted on board with 1/2 hp motor. Flow through water system.

Designed for cutting core samples through the centre. The core holder can be adjusted to take core sizes from 27mm to 65mm. Two speed power feed and perspex hood supplied. Mounted on board with 1/2 hp motor.

This unit is supplied with the microslicer which is designed to hold standard microscope slides to allow trimming of mineral thin sections. Supplied with board and 1/2 hp motor.

This saw is compact and is essential for the precision cutter. Tray size 280 x 200mm. Takes up to 150mm blades. Two speed pulley. Supplied with board and 1/3 hp 1440 rpm motor.

GS6D 150mm (6") deluxe saw has a sliding table which makes it superior to conventional trim saws. The microslicer attachment is designed for cutting thin slices of opal, minerals etc. Supplied with board and 1/3 hp motor.

GS6D 150mm (6") deluxe saw has a sliding table which makes it superior to conventional saws. Supplied with sliding table for hand slicing of specimens. Supplied with board and 1/3hp motor.

GS6D 150mm (6") deluxe saw has a sliding table which makes it superior to conventional trim saws. This model has larger flanges so that very thin blades can be used. Supplied with board and 1/3 hp motor.